⚙️ Technical Compatibility
- Hole Size: Custom to requirements
- Compression Ratio: Tailored to feed formula
Famsun MUZL600 Wood Pellet Die (Stainless Steel, 6mm)
Stainless for Biomass: X46Cr13 stainless steel resists corrosion from wood pellet resins and acids, crucial for maintaining die integrity in long-run biomass production.
Vacuum Quenched: Vacuum heat treatment prevents distortion during quenching, ensuring flat mounting surface and precise hole alignment for uniform biomass pellets.
| Material | X46Cr13 Stainless Steel |
| Hole Size | 4.0 - 8.0 mm |
| Compression Ratio | 1:6 - 1:10 |
| Hardness | HRC 52-55 |
| Feature | Screw Mounting / High Temperature Resistant |
Why Choose Hongyue Spare Parts?
Precision manufacturing for ultimate pelleting performance.
Deep Carburization
Advanced carburizing heat treatment achieves HRC 58-62 surface hardness while maintaining a tough inner core, providing extreme wear resistance against abrasive wood fibers.
CNC Gun Drilling
Precision gun-drilled holes with controlled geometry ensure consistent pellet density and maximum throughput for hardwood and softwood biomass pelleting.
Reinforced Blank Forging
High-pressure forged blanks eliminate internal metallurgical defects, preventing catastrophic die failure during high-pressure biomass compression.
Premium Material & Extended Lifespan
Forged from high-grade X46Cr13 (Stainless Steel), our replacement ring dies and roller shells offer superior resistance against corrosion and abrasive wear during high-temperature pelleting. Processed through advanced vacuum heat treatment, we ensure a uniform hardness (typically HRC 52-56), which maximizes output capacity while minimizing the cost per ton of feed produced.
Frequently Asked Questions
Is this Famsun MUZL600 die compatible with the MUZL610? ▼
Yes, our die is reverse-engineered to match both MUZL600 and MUZL610 mounting specifications with identical screw thread dimensions.
Why use stainless steel for wood pellets? ▼
Wood pellets produce acetic acid and resin during pelleting. X46Cr13 stainless steel resists this corrosion, doubling die life compared to carbon steel in biomass applications.
Why Material Matters
The lifespan of a ring die is determined by its material composition and heat treatment. We use only certified X46Cr13 stainless steel and 20CrMnTi alloy steel, processed through vacuum heat treatment to ensure uniform hardness and maximum wear resistance.
🐟 Feed Ring Die Material
X46Cr13 Stainless Steel
- • Hardness: HRC 52-56
- • Feature: Excellent corrosion resistance for aqua feed
- • Surface Finish: Mirror-polished holes (Ra ≤ 0.8)
🪵 Biomass Ring Die Material
20CrMnTi Alloy Steel
- • Hardness: HRC 55-62
- • Feature: High impact strength for wood fibers
- • Tensile Strength: ≥ 1080 MPa
Hole Finish
Ra 0.8
Precision Gun Drilling
Hardness
HRC 52-62
Vacuum Heat Treatment
Accuracy
100% Check
Final Quality Inspection
✓ OEM Brand Compatibility
* Disclaimer: Hongyue Machinery is an independent manufacturer of premium aftermarket replacement parts. Any reference to original equipment manufacturer (OEM) brand names, trademarks, or machine models (such as CPM, Buhler, Muyang, Zhengchang, etc.) is strictly for the purpose of identifying compatibility. We are not affiliated with, sponsored by, or endorsed by these manufacturers.